Testing the Shielding Effectiveness of Conference Room Signal Jammers

Before installing a conference room signal jammer, it is necessary to test its shielding effectiveness. Conference rooms can be classified into small, medium, and large based on their size. The testing methods for signal jammers in these three types of conference rooms differ due to the varying environments they are located in.

Testing Methods for Small Conference Rooms:

Small conference rooms have a relatively small area and simpler environments, with lower requirements. To test the signal jammer, simply place it on a desk near the wall and check if the mobile phones are shielded at the farthest end of the room.

Testing Methods for Medium Conference Rooms:

Medium conference rooms are usually located on higher floors. The higher the floor, the stronger the signal from the base station to the conference room. Additionally, indoor signal amplification systems are commonly installed in buildings. In this case, it is necessary to test the signal strength of various frequency bands and adjust the signal jammer accordingly. Increasing the power of certain frequency bands may be required to meet the shielding requirements of medium conference rooms. A high-power module can be used to cover the stronger signal bands, while a low-power conference room signal jammer can be used to shield the relatively weaker signal bands. Similar to testing small conference rooms, place the signal jammer on a desk near the wall and check if the mobile phones are shielded at the farthest end of the room.

Testing Methods for Large Conference Rooms:

Large conference rooms, also known as venues, can accommodate hundreds or even thousands of people, such as the Great Hall of the People. The signal jammer used in such large venues is not an ordinary low-power jammer. This allows the conference room signal jammer to maximize its effectiveness.

Testing the shielding effectiveness of conference room signal jammers is crucial before installation. The testing methods vary depending on the size of the conference room and the environment it is located in. By following the appropriate testing procedures, the signal jammer can be adjusted to meet the specific requirements of each conference room type, ensuring effective shielding of mobile phone signals.