How to Build a GPS Jammer at Your Home
Here’s a step by step guide on how to build your own GPS jammer. Below are the main steps we are going to introduce in
27 November 2023
No Comments
Introduction:
Signal Jammers are a new type of information security product that uses specific electromagnetic signals to create a shielding network in protected areas, preventing mobile phones from receiving base station data. When it comes to the installation of signal jammers, there are several important points to consider.
I. Pre-installation Considerations:
- Familiarize yourself with the orientation of the base station and try to align the direction of the shielding with it.
- Pay attention to the presence of metal objects around the device to prevent signal reflection that may affect the shielding effect.
- The optimal installation height should be between 1.8-2.5 meters. The jammer can be placed directly on a table or fixed on a wall or ceiling. It is best to position the antenna perpendicular to the ground.
- If there are signal amplifiers or other similar devices installed indoors, it is not suitable to install a Signal Jammer.
- The signal strength at the installation site is crucial for the effectiveness of the jammer. Understanding the signal strength on-site helps with the installation process.
II. Device Installation:
- Based on the survey results, make reasonable combinations according to different signals to achieve the most ideal conditions. Consider the level of interference outside the shielding area and its impact on the surrounding environment.
- The optimal installation height should be between 1.8-2.5 meters. The jammer can be placed directly on a table or fixed on a wall or ceiling. It is best to position the antenna perpendicular to the ground.
- If there are signal amplifiers or other similar devices installed indoors, it is not suitable to install a Signal Jammer.
- The signal strength at the installation site is crucial for the effectiveness of the jammer. Understanding the signal strength on-site helps with the installation process.
Conclusion:
When installing Signal Jammers, it is important to consider factors such as the orientation of the base station, the presence of metal objects, optimal installation height, the presence of signal amplifiers, and the signal strength at the installation site. By following these considerations, the jammer can be installed effectively, ensuring the desired level of signal shielding.
