Installation Methods of Conference Room Shielding Devices Based on the Size of the Room

Conference room shielding devices are essential for maintaining privacy and preventing interference from external electromagnetic signals. The installation of these devices depends on the size of the conference room. In this article, we will discuss the installation methods for different sizes of conference rooms, without considering the impact of the electromagnetic environment on the shielding effectiveness of the devices.

Popular Signal Jammers For Sale

1. Conference Rooms Smaller than 150 Square Meters:

For conference rooms smaller than 150 square meters, a single conference room shielding device is sufficient to cover the entire room. The device can be placed on the table or mounted on the wall. If a concealed installation is required, the device can be placed on the ceiling. However, it is important to note that the ceiling should not be made of metal.

2. Conference Rooms Larger than 150 Square Meters but Smaller than 500 Square Meters:

For conference rooms larger than 150 square meters but smaller than 500 square meters, it is recommended to install one conference room shielding device for every 150 square meters of area. The devices should be evenly distributed throughout the room. Alternatively, the devices can be placed on the ceiling.

3. Large Conference Rooms Larger than 500 Square Meters:

For large conference rooms larger than 500 square meters, there are two options for selecting the conference room shielding devices. Firstly, if low-power devices are chosen, one device should be installed for every 150 square meters of area, and the devices should be evenly distributed. Secondly, high-power devices can be used, in which case, the device can be placed at the back of the conference room, and omnidirectional or directional antennas can be used for coverage.

The installation of conference room shielding devices depends on the size of the room. For smaller rooms, a single device is sufficient, while larger rooms require multiple devices. The devices can be placed on the table, mounted on the wall, or concealed on the ceiling. It is important to consider the size and layout of the conference room when determining the installation method for the shielding devices.